Skip to content
Press Equals

Linear Feet Calculator

Linear feet = square feet × 12 ÷ board width in inches. 320 sq ft of 5.5-inch boards is 698.2 linear feet, 768 with 10% waste.

Turn square feet into linear feet of boards, trim or flooring from the board width, or add up pieces, with waste, piece count and cost.

Result

Linear feet

436.4ft

Linear feet with waste
480ft
Pieces to buy
60
Linear yards (with waste)
160yd
Linear meters (with waste)
146.3m
How it’s worked out
  1. Linear feet = 200 sq ft × 12 ÷ 5.5 in = 436.4
  2. With 10% waste = 436.4 × 1.1 = 480

What this calculator does

Boards, trim, fencing, countertops and fabric are often sold by the linear foot: a foot of length, however wide the material is. This calculator turns square feet into linear feet from the board width, or adds up pieces and their length, then adds waste, counts the pieces to buy and prices the job.

How to use it

  1. Choose from the area to cover or from pieces and their length.
  2. For an area, enter the square feet and the board width in inches: the face that shows once installed.
  3. For pieces, enter how many and how long each is.
  4. Enter a waste allowance and, if you like, the price per linear foot.

How to calculate linear feet

  • Linear feet from area = square feet × 12 ÷ board width in inches
  • Linear feet from pieces = number of pieces × length in feet
  • With waste = linear feet × (1 + waste %)
  • Pieces to buy = linear feet with waste ÷ length of each piece, rounded up

Examples

Example 1: A 320 sq ft deck. Decking 5.5 inches wide covers 320 sq ft with 320 × 12 ÷ 5.5 = 698.2 ft of board. With 10% waste that's 768 ft, or 48 boards 16 feet long, about $2,496.00 at $3.25 a foot.

Example 2: Trim from pieces. Fourteen 8-foot pieces of 3.5-inch trim are 112 ft, covering 32.7 sq ft.

Tips

  • Use the actual width, not the nominal size. A 1×6 board is 5.5 inches wide; a 2×4 is 3.5.
  • Add more waste for diagonal layouts and lots of cuts: 15% instead of 10%.
  • For lumber volume, use the board foot calculator; to count deck boards from the deck's size, the deck board calculator.

Common questions

How do I convert square feet to linear feet?

Linear feet = square feet × 12 ÷ board width in inches. 320 sq ft of 5.5-inch decking is 698.2 linear feet, 768 with 10% waste.

What is a linear foot?

Just a foot of length, however wide the material is. Boards, trim, countertops and fencing are often priced per linear foot.

How we check this calculator

  • Tested against 4 reference answers worked from published sources or by hand,such as “200 × 12 ÷ 5.5, +10%, ÷ 8 ft”.
  • All 2 worked examples in the article above are run through this calculator, so the two can't disagree.
  • Every input is tried at its smallest and largest values and with random numbers, and must never crash or show a broken number.
  • These checks run automatically before any change goes live.

Spotted a wrong number? Tell us and we'll fix it. See how the calculators are tested.

Updated