What this calculator does
This calculator estimates a car's quarter-mile elapsed time (ET) and trap speed from its weight and horsepower, or works backward to the horsepower from a trap speed or an ET from the drag strip. It uses Hale's formulas, the ones most drag-racing calculators are built on.
How to use it
- Choose what to find: ET and trap speed, horsepower from trap speed, or horsepower from ET.
- Enter the race weight: the car with driver and fuel.
- Enter the flywheel horsepower, or the trap speed or ET from a time slip.
How to estimate quarter-mile time
- ET = 5.825 × (weight ÷ horsepower)^(1/3) seconds
- Trap speed = 234 × (horsepower ÷ weight)^(1/3) mph
- Horsepower from trap speed = weight × (trap speed ÷ 234)³
- Horsepower from ET = weight ÷ (ET ÷ 5.825)³
Weight is in pounds and horsepower is at the flywheel (crank).
Examples
Example 1: A 460 hp sedan. At 3,800 lb with 460 hp, each horsepower carries 8.26 lb. The estimate is 11.78 seconds at 115.8 mph.
Example 2: Horsepower from a time slip. A 3,400 lb car that trapped 108 mph makes about 3,400 × (108 ÷ 234)³ = 334 hp at the flywheel.
Tips
- Trap speed is the better horsepower guide. ET depends heavily on the launch and traction; trap speed mostly on power and weight.
- Real times vary with tires, gearing, altitude, air temperature and the driver. Treat the estimate as a well-run pass on a prepped track.
- For horsepower from torque and rpm, use the horsepower calculator.