Skip to content
Press Equals

How to calculate uptime and allowed downtime

Turn an uptime percentage into allowed downtime per day, month and year, what each extra nine costs, and how to read an uptime promise.

Open the Uptime calculator

An uptime target sets how much downtime is allowed: the rest of the 100%. At 99.9% ("three nines"), a service can be down 0.1% of the time, about 8 hours 46 minutes a year or 43 minutes a month. Each extra nine cuts the allowance by ten.

The formula

Allowed downtime = (100% − uptime %) × the length of the period

A year averages 365.25 days, or 525,960 minutes, counting leap years.

99.9% leaves 0.1% of 525,960 minutes = 526 minutes, which is 8 h 45 min 57 s a year. Spread out, that's 43 min 50 s a month or 1 min 26 s a day.

A month here is an average one, 30.44 days. Some agreements measure each calendar month as it comes, so a 31-day month allows slightly more.

The nines

Uptime Downtime a year Downtime a month
99% (two nines) about 3 days 15.7 hours about 7.3 hours
99.9% (three nines) about 8.8 hours about 43.8 minutes
99.95% about 4.4 hours about 21.9 minutes
99.99% (four nines) about 52.6 minutes about 4.4 minutes
99.999% (five nines) about 5.3 minutes about 26 seconds

99% sounds high, but it allows 3 d 15 h 39 min 30 s of downtime a year, about 7 h 18 min 17 s a month.

Four nines allows just 52 min 36 s a year, or 4 min 23 s a month. At that level, a single slow deploy can use the month's budget.

Reading an uptime promise

  • What counts as down. A service agreement defines it: fully unreachable, too slow, or failing a share of requests. Planned maintenance is often left out.
  • How it's measured. Checked every minute, a 30-second blip may never show up. Checked from one place, a regional outage may be missed.
  • What you get if it's missed. Usually a credit on your bill, not payment for your losses.

Chained services

If your app depends on two services that each promise 99.9%, and either one going down takes you down, your best case is roughly 99.9% × 99.9% ≈ 99.8%. Every hard dependency lowers the ceiling, which is why the parts underneath need more nines than the whole.

Work it out

Enter any uptime percentage in the uptime calculator to see the allowed downtime per day, week, month and year.

Updated

All guides by topic